OVERVIEW of Polyurethane Tubing |
Polyurethane Tubing - Ether 86A & Ester 85A (also sold under the brand name Superthane®)
Flexible Polyurethane Tubing Hose is available in ether and ester, both with optimum abrasion resistance, high tensile strength and low-temperature flexibility. Neither contain plasticizers, so migration is not a problem.
Ether (86A) is resistant to hydrolysis, fungus and weathering. Ester (85A) types give maximum abrasion resistance and good oil, solvent and grease resistance. Both grades (Ether & Ester) meet FDA requirements.
For best results, use sleeved compression fittings with all thermoplastic tubing.
Polyurethane Tubing - Ether 86A & Ester 85A (also sold under the brand name Superthane®)
Polyurethane tubing is available in ether and ester, both with optimum abrasion resistance, high tensile strength and low-temperature flexibility. Neither contain plasticizers, so migration is not a problem.
Ether (86A) is resistant to hydrolysis, fungus and weathering. Ester (85A) types give maximum abrasion resistance and good oil, solvent and grease resistance. Both grades (Ether & Ester) meet FDA requirements.
For best results, use sleeved compression fittings with all thermoplastic tubing.
|
|
FEATURES AND BENEFITS of Polyurethane Tubing |
Features of Flexible Polyurethane Tubing:
Abrasion resistant
High tensile strength
Low temperature flexibility
Colors: Clear
Tubes above 2" OD are usually molded in short lengths (4 foot or less)
Small diameter tubing is extruded in longer coils (50 feet or more).
Coils Lengths:
100' up to 5/8" x 7/8" x 1/8" wall
50' 3/4" x 1 x 1/8" wall and larger.
Cut pieces, special lengths, durometers and colors on a custom basis.
Features of Polyurethane Tubing:
Abrasion resistant
High tensile strength
Low temperature flexibility
Colors: Clear
Tubes above 2" OD are usually molded in short lengths (4 foot or less)
Small diameter tubing is extruded in longer coils (50 feet or more).
Coils Lengths:
100' up to 5/8" x 7/8" x 1/8" wall
50' 3/4" x 1 x 1/8" wall and larger.
Cut pieces, special lengths, durometers and colors on a custom basis.
|
|
|